We manufacture high-grade Spunbond, Spunmelt (SMS/SS), and Specialty functional fabrics tailored for Hygiene, Medical, Safety, and Textile industries.
Hygiene-Grade Nonwoven Fabric: Skin-Safe, Custom GSM, OEM Supply from Pakistan
Olefins Private Limited is a specialist manufacturer of hygiene-grade nonwoven fabrics, supplying diaper manufacturers, feminine care producers, and incontinence product brands across global markets. Our hygiene fabrics are OEKO-TEX Standard 100 Class I certified skin-safe and engineered for the most demanding applications — where skin safety, softness, and liquid management performance are non-negotiable.
Our Hygiene Fabric Product Range
| Component | Construction | GSM | Treatment | Key property |
|---|---|---|---|---|
| Diaper topsheet | Spunbond PP | 10-18 | Hydrophilic | Strike-through ≤3 s, rewet ≤0.2 g |
| Diaper backsheet | Spunbond PP | 15-22 | Hydrophobic | Cloth-like hand, lamination-ready |
| Leg cuff | SMS | 13-20 | Hydrophobic | Hydrostatic head >30 cm H₂O |
| Sanitary napkin coverstock | Spunbond PP | 12-25 | Hydrophilic | Tissue-dry surface, pearlescent option |
| Acquisition layer (ADL) | Through-air bonded | 30-60 | Hydrophilic | Fast acquisition, even distribution |
| Wet wipes substrate | Spunbond PP | 18-28 | Hydrophilic | High wet elongation |
| Adult incontinence backsheet | Spunbond PP | 18-25 | Hydrophobic | Higher basis weight for larger pad area |
Unsure which weight suits your product? Read our guide to choose the right GSM for hygiene nonwoven applications
Why Hygiene Manufacturers Choose Olefins
- Consistent GSM accuracy across full roll width — tolerance ±3%.
- Proven hydrophilic chemistry for rapid liquid pass-through and low rewet.
- Ultra-fine fibre construction for premium softness on skin-contact layers.
- Roll-to-roll consistency for high-speed automated diaper production lines.
- Free samples available — send us your current spec sheet for a comparison sample.
- Bicomponent PP/PE fiber construction available for ultra-soft topsheets requiring premium hand feel and reduced fiber irritation.
Hygiene Nonwoven Fabric Applications
For a detailed breakdown of each diaper layer and its specifications, see our complete guide to nonwoven fabric for baby diapers.
Hygiene Nonwoven Fabric — Frequently Asked Questions
- What GSM nonwoven fabric is used for a baby diaper topsheet?
Most commercial diaper topsheets use hydrophilic spunbond PP between 12 and 16 GSM. Premium and ultra-thin diapers go as low as 10 GSM; economy and adult-size products go up to 18 GSM. The right weight depends on your converting line speed and the absorbent core design underneath — a lighter topsheet needs a well-matched acquisition layer to avoid rewet. Read our GSM selection guide for the full chart.
- What is the difference between hydrophilic and hydrophobic nonwoven for hygiene products?
Hydrophilic fabric is surface-treated to let fluid pass through quickly — it is used wherever liquid must reach the absorbent core, so topsheets and acquisition layers. Hydrophobic fabric repels fluid and is used wherever liquid must be held back: backsheets, leg cuffs and standing gathers. The treatment is applied at finishing and is specified per roll, so a single order can contain both.
- Can Olefins match an existing diaper fabric specification?
Yes. Send your current specification sheet or a physical sample and we will produce a comparison sample matched on GSM, tensile strength, elongation, strike-through and hand feel. Sample dispatch is within 2 business days. Request a comparison sample.
- What is the minimum order quantity for hygiene nonwoven fabric?
Trial and development orders start at 1 metric tonne per specification. Regular supply is quoted per container or per monthly tonnage commitment. Contact us with your GSM, width and estimated monthly volume for exact MOQ and pricing.
Technical Specifications: What Makes Our Hygiene Fabric Different
Olefins hygiene nonwoven fabrics are engineered to meet the strictest requirements of disposable hygiene product manufacturers. Every roll is produced under ISO 13485:2016 quality management with full batch traceability from polymer to finished fabric.
1. Skin Safety & Biocompatibility
All hygiene grades are OEKO-TEX Standard 100 Class I certified — safe for direct prolonged contact with infant skin. We use only virgin polypropylene resin with no recycled content, optical brighteners, or harmful additives. Our fabrics pass ISO 10993 biocompatibility testing for cytotoxicity, skin irritation, and sensitization. This is critical for diaper topsheets and sanitary napkin coverstock where 24/7 skin contact occurs.
2. Advanced Hydrophilic Treatment Technology
Our proprietary durable hydrophilic finish ensures rapid liquid acquisition while maintaining low rewet values even after multiple insults. Unlike topical surfactants that wash off, our treatment is integrated into the fiber matrix during spinning. Result: strike-through time ≤3 seconds and rewet ≤0.2g per EDANA WSP 70.3 standard. We also offer permanent hydrophilic grades for adult incontinence products requiring 8+ hour wear time.
3. GSM Consistency & Roll Uniformity
Using Reicofil 4S technology with in-line beta-gauge monitoring, we maintain GSM tolerance of ±3% across the full 3.2m roll width. This consistency is non-negotiable for high-speed converting lines running 600+ diapers per minute. Uneven GSM causes web breaks, misalignment, and waste. Every Olefins shipment includes a GSM uniformity report with 5-point measurements per roll.
Custom Development & OEM Supply Process
We partner with hygiene brands to develop custom nonwoven specifications for new product launches or cost-optimization projects.
| Stage | Timeline | Deliverable |
|---|---|---|
| 1. Tech Review | Day 1-2 | Free analysis of your target spec vs. our capabilities |
| 2. Lab Samples | Day 3-7 | A4 hand samples in 2-3 GSM/treatment variants |
| 3. Trial Rolls | Day 10-14 | 500-1000 linear meters for machine trials |
| 4. Production | Day 15+ | Full container orders with 21-day lead time |
Minimum order quantity for custom grades: 5 tons. Stock grades available from 1 ton. All export orders shipped FOB Karachi or CIF destination port. Full export documentation including SGS inspection, fumigation certificate, and chamber of commerce attestation provided.
Compliance & Testing Standards We Meet
EDANA/INDA Standards
WSP 70.3 Strike-through, WSP 70.8 Rewet, WSP 80.6 Tensile, WSP 10.1 GSM
Medical Device
ISO 13485:2016, EN 13795 Surgical drapes, AAMI PB70 Level 1-4 barrier testing
Chemical Safety
REACH SVHC compliant, RoHS, FDA 21 CFR 177.1520 for food contact wipes
Every shipment includes: Certificate of Analysis, OEKO-TEX certificate, ISO 13485 certificate, and material safety data sheet. Third-party testing by SGS or Intertek available on request.
Get Technical Data Sheets & Samples
Share your GSM, width, and application — we’ll send matching spec sheets and free A4 samples within 48 hours.
Request TDS & SamplesMedical-Grade SMS & SMMS Nonwoven Fabric — Engineered for Healthcare Environments
Olefins Private Limited manufactures medical-grade SMS and SMMS nonwoven fabrics that meet the barrier, sterility, and biocompatibility requirements of global healthcare product manufacturers. From Level 1 isolation gowns to Level 3 surgical drapes, our medical fabrics deliver the performance your products and your patients demand.
Medical Fabric Products
| Product | GSM Range | AAMI Level | Hydrostatic Head (AATCC 127) | Key Applications |
|---|---|---|---|---|
| SMS — Light Medical | 25-45 GSM | Level 1-2 | L2: ≥20 cm H₂O | Isolation gowns, surgical caps, shoe covers |
| SMMS — Standard Medical (Surgical Gowns) | 35-55 GSM | Level 2-3 | L3: ≥50 cm H₂O | Surgical gowns, drapes, sterile wraps |
| SMMS — High Barrier | 40-60 GSM | Level 3-4 | ≥50 cm H₂O + Blood/Viral barrier for L4 | High-fluid surgical gowns, Type 5/6 PPE Coveralls |
| Spunbond — PPE Components | 20-30 GSM | Base layer | Spray Rating ≥3 (ISO 4920) | Face mask layers, medical caps, coverall lining |
SMS (S-M-S) is a three-layer construction and SMMS (S-M-M-S) adds a second meltblown layer for higher barrier uniformity at the same GSM. Specify SMS for Level 1-2 isolation and SMMS for Level 3 surgical gowns where ≥50 cm H2O is required — see our full SMS vs SMMS difference guide for specs, hydrostatic head and cost. For full GSM specifications across hygiene, medical and PPE applications, see GSM Nonwoven Fabric Guide.
For a technical comparison of fabric constructions, see our spunbond vs spunmelt guide.
Compliance & Standards
- Fabrics tested against ASTM F1670 synthetic blood penetration standard.
- Hydrostatic head pressure tested per EN 20811.
- Bacterial filtration efficiency (BFE) data available on request.
- Biocompatibility — materials comply with REACH regulations.
- Test reports and material safety data sheets provided with every order.
AAMI PB70 Barrier Levels and Matching Fabric Specification
| AAMI Level | Typical Application | Construction | GSM | Hydrostatic Head |
|---|---|---|---|---|
| Level 1 | Visitor gowns, basic isolation, minimal fluid risk | Spunbond or light SMS | 20-35 | Low |
| Level 2 | Isolation gowns, low-fluid procedures, blood draw | SMS | 35-45 | >20 cm H2O |
| Level 3 | Surgical gowns, arthroscopy, moderate fluid exposure | SMMS | 45-60 | >50 cm H2O |
| Level 4 | Critical zones, high fluid and pathogen exposure | SMMS or film laminate | 60-70 | Requires ASTM F1671 pass |
Barrier level is a property of the finished garment, not the fabric alone. Olefins supplies fabric with the test data needed to support your garment certification.
Certification & Documentation
Olefins supplies medical-grade nonwoven fabric with full lot-level test documentation covering GSM (ISO 9073-1), tensile strength (ISO 9073-3), hydrostatic head (EN 20811) and synthetic blood penetration resistance (ASTM F1670). We provide complete test reports and material safety data sheets with every order to support your garment-level AAMI PB70, EN 13795, or FDA 510k submission. Full detail is in our guide to medical nonwoven fabric certifications.
Medical Nonwoven Fabric — Frequently Asked Questions
- What AAMI level do I need for a surgical gown?
Level 3 is the minimum for moderate fluid exposure in surgery. Level 4 is required for high-risk procedures with known pathogen exposure. The exact level is specified by your hospital or device regulator. We supply SMMS 45-60 GSM for Level 3, and SMMS 60-70 GSM or film laminate for Level 4, with ASTM F1671 test data.
- Can Olefins provide fabric for EO or gamma sterilisation?
Yes. Our SMS and SMMS fabrics are compatible with ethylene oxide (EO) and gamma irradiation sterilisation. We provide post-sterilisation test data on request to support your sterile barrier system validation.
- Do you hold ISO 13485 certification?
Olefins is ISO 9001:2015 certified for quality management. We do not hold ISO 13485. We supply fabric with full lot-level test data — GSM, tensile, hydrostatic head, and ASTM F1670 — for your garment-level ISO 13485 or FDA 510k submission.
- What is the difference between AAMI PB70 and EN 13795?
AAMI PB70 is the US standard that defines barrier levels 1-4 based on water resistance and blood penetration. EN 13795 is the European standard for surgical gowns and drapes, with "Standard" and "High Performance" classifications. The test methods overlap. We supply data for both standards on request.
Medical Nonwoven Fabric Manufacturing: Cleanroom to Converting
Olefins medical fabrics are manufactured in ISO Class 8 cleanroom-equivalent environments to prevent particulate contamination. Our Reicofil 4S lines use dedicated polymer handling systems for medical grades — no cross-contamination with industrial or hygiene lines.
1. Raw Material Selection & Traceability
We use only FDA-compliant virgin polypropylene resins from ExxonMobil and LyondellBasell. Every batch includes USP Class VI biocompatibility certification and DMF letters for FDA 510(k) submissions. Full lot traceability is maintained from polymer pellet to finished roll — critical for medical device manufacturers facing FDA audits. Resin certificates, migration test data, and irradiation stability reports are provided with each shipment.
2. Sterilization Compatibility Testing
Our SMMS medical fabrics are validated for Ethylene Oxide (EO), Gamma irradiation at 25-50 kGy, and E-beam sterilization. Post-sterilization testing confirms no degradation in tensile strength, elongation, or barrier performance. We provide sterilization validation reports per ISO 11135 and ISO 11137 standards. This data supports your device master file and reduces your qualification timeline by 6-8 weeks.
3. In-Line Quality Control & Lab Testing
Every master roll undergoes 100% in-line testing for GSM uniformity using beta-gauge, pinhole detection via light table inspection, and barrier testing. Our in-house lab performs AAMI PB70 hydrostatic head testing, ASTM F1670 synthetic blood penetration, and EN 13795 microbial penetration resistance. Test reports with actual values — not ranges — accompany every lot. We retain samples for 5 years for regulatory traceability.
Choosing the Right Medical Fabric for Your Application
Selecting fabric for medical devices requires balancing barrier performance, breathability, comfort, and cost. Wrong selection leads to failed biocompatibility tests or uncomfortable end-products.
| Application | Recommended Fabric | Why This Spec |
|---|---|---|
| Surgical Gowns — Level 3 | SMMS 45-60 GSM, Alcohol Repellent | Hydrostatic head >50 cm H2O, passes ASTM F1671 viral penetration |
| Surgical Drapes | SMMS 50-60 GSM + Film Laminate | Impervious barrier in critical zone, breathable in non-critical areas |
| Face Mask Outer Layer | Spunbond 25-30 GSM, Hydrophobic | Fluid resistance + low pressure drop for breathability |
| PPE Coveralls | SMS 50-65 GSM, Antistatic | Type 5/6 protection, comfortable for 8-hour shifts |
| Sterilization Wrap | SMMS 60-70 GSM, High Porosity | Allows EO/gamma penetration, maintains sterility for 6 months |
Unsure which AAMI level or construction your product needs? Our technical team provides free specification matching based on your target standard — AAMI PB70, EN 13795, or China YY/T 0506. Send us your competitor sample or device requirements for a direct comparison report.
Request Medical Fabric Qualification Pack
Get full test data: ASTM F1670, F1671, EN 20811, ISO 10993. Includes free samples in your target GSM.
Get Qualification PackSafety & Protective Nonwoven Fabric — Coveralls, Masks & PPE Components
Olefins supplies high-performance nonwoven fabrics to manufacturers of safety clothing, industrial PPE, and protective equipment. Our fabrics are engineered to deliver the barrier properties, breathability, and durability that safety products require — at competitive Pakistan manufacturing costs.
Safety Fabric Products
- Coverall Fabric: Spunbond PP 30–60 GSM: Lightweight disposable coverall fabric. Breathable, tear-resistant, available with antistatic treatment. For food processing, light industrial, and pharmaceutical clean rooms.
- Barrier Coverall Fabric: SMS Nonwoven 40–70 GSM: Moderate barrier coverall fabric for chemical splash protection, healthcare environments, and hazardous materials handling.
- Face Mask Fabric: Spunbond PP 20–25 GSM: Outer and inner layers for surgical and industrial face masks. Low particulate shedding, consistent formation.
- Disposable Workwear: Spunbond PP 25–35 GSM: Disposable lab coats, aprons, sleeve covers, and shoe covers for food production, laboratory, and medical environments.
Not sure whether spunbond or SMS is right for your application? Read our technical guide on spunbond vs SMS for coveralls and protective workwear.
Industries Served
- Industrial manufacturing — chemical plants, automotive, electronics clean rooms.
- Food processing — hygiene workwear for food production and packing facilities.
- Healthcare — Level 1 PPE for clinical and hospital environments.
- Construction — disposable painter suits, dust protection workwear.
- Disaster response and emergency services — single-use protective suits.
For higher barrier surgical applications, see our medical grade fabric range.
Protective Clothing Types and Matching Fabric
European PPE buyers specify fabric against EN standards. We supply spunbond and SMS grades for:
Types 1-4 require microporous film laminates or barrier composites and are outside Olefins' spunbond and spunmelt range.
Safety Nonwoven Fabric FAQs
- What is Type 5 vs Type 6 protective clothing?
Type 6 — EN 13034 covers limited liquid splash protection using 40–60 GSM spunbond PP. Type 5 — EN ISO 13982-1 covers airborne solid particulate protection using 45–65 GSM SMS/SMMS. Type 5/6 combined garments meet both standards using 50–70 GSM SMMS for particulate + light splash protection. Types 1-4 require microporous film laminates and are outside Olefins' spunbond and spunmelt range.
- What GSM is used for disposable coveralls?
Basic Type 6 coveralls use 40–60 GSM spunbond PP for liquid splash resistance. Type 5 particulate protection requires 45–65 GSM SMS. For combined Type 5/6 protection, 50–70 GSM SMMS is standard. Heavier 70–80 GSM is used for reusable or enhanced durability workwear. Olefins supplies spunbond and SMS/SMMS grades from 20–80 GSM for all protective clothing classes.
- Do you supply antistatic fabric as per EN 1149-5?
Yes. Olefins supplies antistatic-treated spunbond and SMS in any GSM with surface resistivity per EN 1149-5 for electrostatic dissipative protective clothing. Required for ATEX zones, electronics cleanrooms, and fuel handling applications. Antistatic treatment prevents static discharge that could ignite flammable atmospheres. Available in any Pantone colour with 1,000 kg minimum for custom colours.
- What is the difference between SMS and SMMS for PPE?
SMS = Spunbond-Meltblown-Spunbond with one meltblown layer. SMMS = Spunbond-Meltblown-Meltblown-Spunbond with dual meltblown layers. SMMS gives higher particulate filtration efficiency and better Type 5 protection under EN ISO 13982-1. SMS is sufficient for Type 6 liquid splash per EN 13034. Both can be antistatic treated per EN 1149-5. SMMS is specified for Level 2–3 surgical gowns and combined Type 5/6 coveralls.
PPE Fabric Performance: Key Test Data & Buyer Requirements
European and global PPE buyers specify nonwoven fabric against EN standards with documented test values. Olefins provides full test data with every lot to support your CE marking and product certification.
1. EN 13034 Type 6 — Limited Liquid Splash Protection
Type 6 coveralls protect against light spray and liquid aerosols in chemical handling, agriculture, and painting. Our 40-60 GSM spunbond PP achieves EN 13034 compliance through hydrophobic treatment with contact angle >90°. Fabric passes ISO 6530 repellency test for 30% sulfuric acid, 10% sodium hydroxide, o-xylene, and butanol. Spray impact penetration ≤1% per EN 468. Seam strength tested per ISO 13935-2 exceeds 75N to prevent burst during movement. We supply actual test values: our standard 50 GSM spunbond averages 0.3% penetration against water spray.
2. EN ISO 13982-1 Type 5 — Airborne Solid Particulate Protection
Type 5 protection is mandatory for asbestos removal, pharmaceutical powder handling, and hazardous dust environments. Our 45-65 GSM SMS achieves >95% particle filtration efficiency for 0.3 micron particles per EN ISO 13982-2 inward leakage test. The meltblown core provides the filtration barrier while spunbond layers add strength and abrasion resistance. Antistatic treatment per EN 1149-5 ensures surface resistivity 10^5-10^11 ohms to prevent dust attraction and electrostatic discharge in ATEX zones. Each roll tested for air permeability: 25-40 m³/m²/min at 200 Pa to balance protection with breathability.
3. EN 1149-5 Antistatic Performance for ATEX Zones
Oil & gas, paint shops, and electronics cleanrooms require antistatic PPE to prevent sparks. Our antistatic spunbond and SMS use durable carbon-based treatment that withstands 5 wash cycles. Surface resistance tested per EN 1149-1: 2.3 x 10^8 ohms average, well within the 10^5-10^11 ohm requirement. Charge decay time <0.5 seconds per EN 1149-3. Unlike topical sprays, our treatment is integrated during fiber extrusion and does not flake off. Certificate of conformity provided for each lot with actual resistivity values measured at 25°C, 30% RH.
Customization & Supply for PPE Manufacturers
We support PPE brands with custom fabric development for new certifications or cost optimization projects.
| Customization | Available Options | MOQ |
|---|---|---|
| Colors | Any Pantone, masterbatch color matching, white, blue, green standard | 1 ton for custom, 500 kg stock colors |
| Treatments | Antistatic, Alcohol Repellent, Flame Retardant, Antibacterial | 3 tons per treatment |
| Widths | 1.6m, 2.4m, 3.2m — slit to any width 20cm+ | 5 tons for custom width |
| Lamination | PE film 15-25 micron for Type 3/4 liquid-proof barrier | 5 tons |
Lead time: 21 days for standard grades, 35 days for custom colors/treatments. All export orders shipped FOB Karachi with SGS inspection, fumigation, and EUR.1 certificate for EU duty preference. We support CE Technical File compilation with full fabric test data, risk assessment, and declaration of conformity drafts.
Get EN Test Reports & Type 5/6 Samples
Share your target EN standard and GSM — we’ll send matching test reports and free samples within 48 hours.
Request PPE Fabric DataTextile & Industrial Nonwoven Fabric — Interlinings, Geotextiles & Agricultural Covers
Olefins manufactures nonwoven fabric solutions across the full spectrum of textile and technical applications. From garment interlinings and home textile components to heavy geotextile engineering fabrics and agricultural covers, our spunbond PP range provides the performance textile manufacturers need at competitive pricing. For skin-contact and hygiene applications, explore our hygiene grade nonwoven fabric range.
Textile Fabric Products
- Garment Interlining: Spunbond PP 20–80 GSM: Fusible and non-fusible interlining for garments. Provides structure and shape retention in collars, cuffs, plackets, and jacket fronts. Customizable stiffness.
- Home Textiles: Spunbond PP 30–80 GSM: Mattress ticking back layer, quilt batting substrate, pillow cover backing, and sofa dust cover. Durable, non-allergenic.
- Geotextile Fabric: Spunbond PP 80–200 GSM: Non-woven geotextile for road construction, retaining walls, drainage layers, and slope stabilization. Separates soil layers, controls erosion.
- Agricultural Nonwoven: UV-Stabilized Spunbond PP 17–50 GSM: Crop protection cover, weed control mulch, frost protection, and shade fabric for horticulture and commercial agriculture.
Need help deciding the right weight for your application? Use our GSM selection guide to specify correctly before ordering.
Furniture & Upholstery Nonwoven Fabric
We manufacture spunbond nonwoven fabric for furniture, sofa, and mattress applications. Key products include dust cover, upholstery backing, and cambric for bedding. All fabrics are lint-free with dimensional stability for fusible interlining applications.
| Sofa dust cover / bottom cloth | 40-70 GSM · Black, white · Dimensional stability, low linting |
| Sofa and chair lining | 50-80 GSM · Any Pantone · Tear strength, staple-gun resistance |
| Mattress ticking back layer | 60-100 GSM · White · Non-allergenic, quilting compatible |
| Cushion and pillow inner cover | 30-50 GSM · White · Softness, fibre containment |
| Upholstery interlining | 30-60 GSM · White, natural · Shape retention |
Textile Nonwoven Fabric FAQs
- What is fusible interlining nonwoven fabric?
Fusible interlining has a thermoplastic adhesive coating. It bonds to garment fabric when heat-pressed, giving collars and cuffs shape retention. We supply 20-80 GSM with dot or powder adhesive for apparel manufacturers.
- What GSM is used for sofa dust cover?
Sofa dust cover or bottom cloth uses 40-70 GSM black or white spunbond. Key requirement is dimensional stability and low linting so fibers don't shed inside furniture. Also called cambric in bedding.
- Do you supply UV stabilised fabric for agriculture?
Yes. Our crop cover and mulching fabric is UV stabiliser treated for 6-24 months outdoor life. Range: 17-50 GSM in white or black. Improves crop yield by regulating soil temperature and moisture.
- What is AOS and permittivity in geotextiles?
AOS is Apparent Opening Size — controls soil particle retention. Permittivity measures water flow rate through the fabric. We test both for road, drainage & erosion control grades: 80-200 GSM.
Technical Deep-Dive: Geotextiles, Interlinings & Crop Covers
Textile and industrial nonwovens demand specific mechanical and environmental properties. Olefins engineers fabric to meet ASTM, ISO, and industry standards for each application.
1. Geotextile Nonwoven: Engineering for Civil Projects
Our 80-200 GSM spunbond geotextiles provide separation, filtration, drainage, and reinforcement functions in road construction, railways, and landfill sites. Key specifications: Grab Tensile Strength 400-900N per ASTM D4632, Puncture Resistance CBR 1500-3500N per ASTM D6241, and Apparent Opening Size AOS 0.15-0.30mm per ASTM D4751. High permittivity >0.2 sec⁻¹ ensures rapid water flow while retaining soil particles. UV-stabilized grades last 3+ years exposed. We supply test data for every lot: permittivity, AOS, trapezoidal tear, and UV resistance per ASTM D4355. Standard rolls: 3.2m x 100m or 200m, slit to project widths. Black and grey colors available to reduce photocatalytic degradation.
2. Nonwoven Interlining: Performance in Garment Manufacturing
Fusible and non-fusible interlinings require dimensional stability during cutting, sewing, and heat-pressing at 150-170°C. Our 20-80 GSM spunbond interlinings use low-melt adhesive dots or powder coating for fusible grades. Key parameters: Shrinkage <1% at 150°C, peel strength >6N/5cm per ISO 9073-4, and hand feel optimized for collars, cuffs, and waistbands. Non-fusible sew-in grades provide bulk without adhesive. All interlinings are lint-free to prevent contamination in cutting rooms. We match stiffness to your requirement — soft drape for shirts, firm body for jackets. OEKO-TEX Class I certification ensures no skin irritation for shirt collars and cuffs.
3. Agricultural Nonwoven: Crop Protection & Yield Improvement
Crop cover fabric must balance light transmission, air permeability, and UV life. Our 17-50 GSM UV-stabilized spunbond provides 85-90% light transmission while blocking insects and reducing wind damage. Treated with HALS UV stabilizers for 12-24 month outdoor life per ASTM G154 QUV testing. Black mulch fabric suppresses weeds by blocking 99% light while warming soil 3-5°C for earlier harvests. Water permeability >300 L/m²/s allows rain and irrigation through. Widths up to 3.2m seamless, or heat-welded to 6m+ for large fields. We also supply white frost protection fabric that raises temperature 2-4°C on cold nights while preventing leaf burn from direct contact.
Custom Manufacturing & OEM Supply for Textile Industry
Olefins supports furniture brands, apparel factories, and civil contractors with custom nonwoven specifications and private-label supply.
| Industry | Custom Options | Lead Time & MOQ |
|---|---|---|
| Furniture | Any Pantone dust cover, logo printing, flame retardant CRIB 5 | 3 tons MOQ, 21 days |
| Apparel | Custom stiffness, dot/powder adhesive, pre-shrunk, anti-static | 2 tons MOQ, 18 days |
| Geotextile | Project-specific width, color-coded, high UV, tensile >1000N | 5 tons MOQ, 25 days |
| Agriculture | Custom width 1-6m, reinforced edges, perforation patterns | 3 tons MOQ, 21 days |
All custom orders include full technical data sheets, compliance certificates, and production samples for approval. We support vendor qualification audits and can ship directly to your factory or project site. Export documentation includes SGS inspection, EUR.1 for EU duty preference, and certificate of origin from Karachi Chamber of Commerce.
Why Textile Manufacturers Choose Olefins Pakistan
Wide GSM Range
17-200 GSM on 3.2m Reicofil lines — from lightweight crop cover to heavy geotextile
Fast Sampling
A4 samples in 48 hours, trial rolls in 10 days for machine qualification
Export Expertise
50+ countries served. CIF pricing, LC payment, full compliance docs
Request Textile Nonwoven Samples & Pricing
Tell us your application, required GSM, width, and annual volume. Get samples and CIF quote in 24 hours.
Get Textile Fabric QuotePP Nonwoven Fabric Rolls — Wholesale Bulk Supplier from Pakistan
Olefins Private Limited is a bulk wholesale supplier of polypropylene nonwoven fabric rolls, exporting to manufacturers, traders, and distributors worldwide. Whether you need a single container load or a regular monthly supply program, Olefins provides consistent quality PP nonwoven in the exact specifications your business requires.
Available Roll Specifications
| Parameter | Spunbond PP | SMS Nonwoven | SMMS Nonwoven | Custom |
|---|---|---|---|---|
| GSM Range | 10–150 GSM | 15–70 GSM | 20–80 GSM | On request |
| Width | 100–320 cm | 100–280 cm | 100–260 cm | Any |
| Roll Length | 500–3,000 m | 500–2,000 m | 500–1,500 m | Custom |
| Core Diameter | 76mm (3 inch) | 76mm (3 inch) | 76mm (3 inch) | Custom |
| Colors | Any Pantone | White standard | White / custom | Any |
| Min Order | 500 kg | 1,000 kg | 1,000 kg | Contact us |
| Packing | PE film wrapped, palletized | PE film, palletized | PE film, palletized | As required |
Wholesale Ordering Process
- Send specification to info@olefins.net (fabric type, GSM, width, color, quantity, destination)
- Receive quotation within 24 hours (FOB Karachi pricing)
- Request and receive fabric samples before committing to bulk order
- Confirm order — 50% advance payment, production begins
- Production: 10–25 days depending on specification
- Balance payment before shipment (50% on completion)
- Shipping documents provided: Bill of Lading, Packing List, Invoice, Certificate of Origin
- Goods shipped FOB Karachi or CIF destination as agreed
Container Load Planning
Planning your container? Here are typical loading quantities for standard container sizes:
- 20ft container: approximately 8,000–12,000 kg of nonwoven fabric (depends on roll dimensions and density)
- 40ft standard: approximately 16,000–22,000 kg
- 40ft high cube: approximately 18,000–25,000 kg — recommended for lighter GSM fabric
- Less-than-container (LCL): Available for trial orders below full container quantities
Nonwoven Fabric for Bags — PP Spunbond Shopping Bag & Tote Fabric Manufacturer
The global shift from single-use plastic bags to reusable alternatives has made PP spunbond nonwoven fabric the material of choice for shopping bags, promotional totes, and branded carry bags worldwide. Olefins Private Limited is a specialist manufacturer of nonwoven bag fabric, supplying bag manufacturers and printing companies across Pakistan, GCC, and international markets.
Designed as PP spunbond nonwoven fabric specifically engineered for bag manufacturing, we produce fabric rolls in 40–120 GSM with custom colors, widths up to 2.2 meters, and pristine gravity-surface treatment. Our bag fabric is used by manufacturers across Pakistan, UAE, Saudi Arabia, and Africa to produce t-shirt, vest, loop-handle, and box-type shopping bags.
Why PP Spunbond is the #1 Material for Reusable Bags
- Lightweight: 80 GSM nonwoven bag weighs less than 30 grams — easy to carry and fold.
- Durable: Tensile strength of 40–80 N/50mm — holds 5–10 kg loads easily.
- Printable: Accepts screen printing, flexo printing, and heat transfer in any color.
- Cost-effective: Significantly cheaper per unit than cotton canvas or jute.
- Eco-friendly: 100% recyclable PP — clearly superior to single-use plastic bags.
- Water resistant: Naturally hydrophobic — contents stay dry in light rain.
- Consistent: Uniform thickness and weight across full roll for consistent bag production.
Nonwoven Bag Fabric Specifications from Olefins
| Application | Recommended GSM | Width Options | Common Colors | Printing |
|---|---|---|---|---|
| Light promotional bags | 60–70 GSM | 100–200cm | White, any Pantone | Screen print ready |
| Standard shopping bags | 80 GSM | 100–250cm | White, black, colors | All methods |
| Heavy duty carry bags | 100–120 GSM | 100–320cm | Any custom color | All methods |
| Exhibition / gift bags | 80–100 GSM | Custom widths | Branded colors | Heat transfer OK |
| Grocery & supermarket bags | 80–90 GSM | Standard widths | White or custom | Flexo printing |
Custom Color Nonwoven Bag Fabric
Olefins produces nonwoven bag fabric in any Pantone color with consistent, vibrant color throughout the fabric — not just printed on the surface. This means the cut edges and reverse side of your bags show the same color as the front, giving finished bags a premium look.
- Minimum order for custom color: 1,000 kg per color
- Color matching: Provide Pantone reference or physical color sample
- Color fastness: Tested to ISO 105-B02 (light fastness) standard
- Production lead time: 15–20 days for custom color orders
Why Bag Manufacturers Choose Olefins
- Consistent roll-to-roll GSM — critical for bag production line consistency
- Tight width tolerance (±0.5cm) — reduces wastage in bag cutting
- High roll length — up to 2,000m per roll minimizes changeovers on automated bag machines
- Bulk pricing available for large volumes — significant per-meter discounts at 10+ tonne orders
- Export capability — regular shipments to UAE, Saudi Arabia, Egypt, Bangladesh, and beyond
Hygiene Nonwoven Fabric
10–35 GSM hydrophilic and hydrophobic Spunbond & Soft SS Spunmelt for baby diaper topsheet and backsheet, sanitary napkin coverstock, adult incontinence and wet wipes.
View Hygiene Fabrics →Medical Nonwoven Fabric
25–70 GSM high-barrier Spunmelt (SMS and SMMS) for surgical gowns, drapes, sterile wraps and isolation gowns. Hydrophobic finish with test data supplied per lot.
View Medical Fabrics →Safety & PPE Nonwoven Fabric
20–80 GSM Spunbond and SMS Spunmelt for Type 5 and Type 6 disposable coveralls, lab coats, aprons and face mask layers. Available in any custom Pantone colour.
View Safety Fabrics →Textile & Industrial Nonwoven
20–200 GSM Spunbond and Specialty Fabrics (UV-stabilised, Flame Retardant) for garment interlining, mattress backing, geotextiles, and agricultural crop covers.
View Industrial Fabrics →Pricing & Ordering
Indicative 2026 pricing by construction and GSM is published in our nonwoven fabric price guide. For container-quantity orders see wholesale PP nonwoven rolls, and for reusable bag production see our nonwoven bag fabric specifications.
MOQ: 1 ton per colour/GSM. Lead time: 15–20 days ex-Karachi. Payment: 30% TT advance, 70% before shipment.
Certifications & Testing: ISO 9073-1 (mass per unit area), ISO 9073-3 (tensile strength), EN 20811 (hydrostatic head resistance), ASTM F1670 (synthetic blood penetration), bacterial filtration efficiency ≥95% for medical grades. Calender bonding and denier controlled per lot. Test reports provided with shipment.
For all products: Contact us at info@olefins.net or WhatsApp +92 316 2055400 with your required GSM, width, quantity, and application. We will respond within 24 hours with a detailed quotation.
